Infelizmente, a descrição deste produto ainda não está em Portuguê portanto, você encontrará uma descrição em Inglês do produto aqui.
Pixel Timer Remote Control Wireless TW-282/N3 for Canon
The Pixel TW-282/N3 Wireless Timer Remote Control can be used to wirelessly trigger your Canon camera from up to 100 meters away. The TW-282 allows you to take singular photos, multiple photos and photos with a customized shutter speed. If you are able to adjust the exposure time on your camera, the TW-282 allows you to manually set the exposure time up to 99 hours, 59 minutes and 59 seconds. Delay shooting is also possible with the TW-282. In the delay-shooting mode, you are able to select the number of photos you wish to take (1-99) after setting a delay of up to 59 seconds. Once the timer has counted down, the camera will begin taking the selected number of photos with an interval of 1 second. Further, it is possible to set up a timing plan whereby a delay, exposure time and the interval between photos, all of up to 99 hours, 59 minutes and 59 seconds, can be set. Within this time plan, the number of photos you wish to take can be set from either 1-99 photos or an unlimited amount which, triggers the camera to continuously take photos until you press stop. The transmitter sends a signal of 2.4GHz to 100 meters away, at up to 99 different channels. The 2 AAA batteries located within the remote, have a standby time of up to 3 years.
The receiver is equipped with a standard ¼” female thread on the bottom, which allows you to place it on top of a light stand next to your camera. Alternatively, the universal hotshoe connection allows you to place the receiver on top of your camera. The 3V lithium battery provides up to 400 hours standby time.
The TW-282/N3 Wireless Timer Remote Control is suitable for the following cameras:
Canon: EOS 10D ,EOS 1D,EOS 1D C, EOS 1D mk II, EOS 1D mk II N, EOS 1D mk III, EOS 1D mk IV, EOS 1D X, EOS 1D X MK II, EOS 1Ds, EOS 1Ds mk II, EOS 1Ds mk III, EOS 1V, EOS 20D, EOS 20Da, EOS 3, EOS 30D, EOS 40D, EOS 50D, EOS 5D, EOS 5DS, EOS 5DSR, EOS 5DS R, EOS 5D mk II, EOS 5D mk III, EOS 5D MK IV, EOS 6D, EOS 6D MK II, EOS 7D, EOS 7D mk II, EOS D30, EOS D60
Included:
- TW-282 transmitter
- receiver TW-283 (successor of TW-282)
- CR-2 battery
- 2 x AAA batteries
- connection cable Shutter
- Manual
